HRANITHERM 600.64 Natural - EVA Hot Melt

HRANITHERM 600.64 Natural - EVA Hot Melt

Beige (natural colour) filled hot melt adhesive based on EVA in granules is intended for automatic edge-banding machines.

  • gluing ABS edges coated with primer
  • gluing solid wood edges
  • gluing polyester edges
  • gluing edges based on laminate (suitable for pre-coating)
  • suitable for soft-forming application


Beige (natural colour) hot melt adhesive Hranitherm 600.64 based on EVA is ideal for rapid edge-banding machines. It is characterised by good adhesion, good open time, higher resistance to fibre formation. It has excellent melting rate and thus also the feed rate.

Brookfield viscosity (200°C at 27/2 rpm) 55,000-80,000 mPas
Softening point (ring and ball method) 100 °C
Bulk density (at 200°C) 1.38 g/cm3
Suitable working conditions:
Temperature in vessel
Temperature on roller
Material moisture content
Ideal feed rate
Pressure on snub rollers


Keep in original container. If stored in closed containers in a cold and dry place at temperatures not exceeding 20°C, the shelf life is 24 months.


When using the hot melt adhesive, observe the application temperature and check it on a regular basis by measuring on the roller or nozzle. The temperature shown on the edge-banding machine control panel may differ from the actual temperature. Lower temperature of the adhesive may affect its open time and consequently impair the bonded joint quality. At a higher temperature, the adhesive may degrade, which affects its colour, viscosity and adhesion. When banding edges from various materials, regular testing of banding strength and quality is advisable. Recommended temperature of the environment and materials is

Clean any residual adhesive on furniture elements using Hraniclean 01 (08). In glue pots use Jowat 236.50.

Please login or register to see product prices.

HRANITHERM 600.64 Natural - EVA Hot Melt 5 kg granule
5 kg granule
HRANITHERM 600.64 Natural - EVA Hot Melt 25 kg granule
25 kg granule